[Ldl62] aide pour l'analyse d'un fichier log
Nicolas Nanchen
nnanchen at linux62.org
Lun 24 Jan 20:17:23 CET 2011
Bonsoir à tous,
désolé de ne pas avoir pu assisté à l'AG du week-end dernier mais avec
la naissance de mon petit dernier le 4 janvier 2011, je n'ai pas un
moment à moi.
Je reviens vers vous car au lancement de mon media-center sous Ubuntu
10.4 LTS, j'ai toujours des messages d'erreur. Cependant ensuite, après
ouverture de la cession, le seul dysfonctionnement vent du lecteur DVD.
J'ai revendu le lecteur blu-ray d'origine qui posait problème et en fait
j'ai le même souci avec le lecteur DVD de remplacement.
Donc ca ne vient pas du matériel. Peut-être de la carte mère ?
Pouvez-vous m'aider à décortiquer le fichier log ci-joint qui correspond
à tous les messages émis par le noyau lors du boot pour voir si les
messages d'erreur y figurent, et comment les solutionner ?
D'avance merci.
Nicolas.
-------------- section suivante --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-27-generic (buildd at roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 (Ubuntu 2.6.32-27.49-generic 2.6.32.26+drm33.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000070000000 (usable)
[ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 0000000080000000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 120000000 mask FF0000000 write-back
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000070000000 (usable)
[ 0.000000] modified: 0000000070000000 - 0000000080000000 (reserved)
[ 0.000000] modified: 0000000080000000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37856000 - 37fef17b
[ 0.000000] Allocated new RAMDISK: 008e1000 - 0107a17b
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef17a to 008e1000 - 0107a17a
[ 0.000000] ACPI: RSDP 000f7d60 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT cfee3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP cfee3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: DSDT cfee3100 07E7B (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfee1800 00040
[ 0.000000] ACPI: HPET cfeeb040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG cfeeb080 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC cfeeaf80 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: SSDT cfeeb720 00590 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008dd000 - 00008e00a6] BRK ==> [00008dd000 - 00008e00a6]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e1000 - 000107a17b] NEW RAMDISK ==> [00008e1000 - 000107a17b]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f3ac0] f3ac0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cfee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00070000
[ 0.000000] 0: 0x00080000 -> 0x000cfee0
[ 0.000000] On node 0 totalpages: 786031
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c107c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4878 pages used for memmap
[ 0.000000] HighMem zone: 553940 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779377
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-27-generic root=UUID=87fd01b9-db29-45e9-9b40-3fc85de488a6 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 17033280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfee0)
[ 0.000000] Memory: 3082772k/3406720k available (4682k kernel code, 60224k reserved, 2120k data, 656k init, 2235272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592a37 - 0xc07a4ce8 (2120 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592a37 (4682 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.092 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.18 BogoMIPS (lpj=11200368)
[ 0.004016] Security Framework initialized
[ 0.004031] AppArmor: AppArmor initialized
[ 0.004037] Mount-cache hash table entries: 512
[ 0.004132] Initializing cgroup subsys ns
[ 0.004134] Initializing cgroup subsys cpuacct
[ 0.004138] Initializing cgroup subsys memory
[ 0.004143] Initializing cgroup subsys devices
[ 0.004145] Initializing cgroup subsys freezer
[ 0.004146] Initializing cgroup subsys net_cls
[ 0.004162] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004164] CPU: L2 cache: 3072K
[ 0.004166] CPU: Physical Processor ID: 0
[ 0.004167] CPU: Processor Core ID: 0
[ 0.004169] mce: CPU supports 6 MCE banks
[ 0.004176] CPU0: Thermal monitoring enabled (TM2)
[ 0.004178] using mwait in idle threads.
[ 0.004183] Performance Events: Core2 events, Intel PMU driver.
[ 0.004189] ... version: 2
[ 0.004191] ... bit width: 40
[ 0.004192] ... generic registers: 2
[ 0.004193] ... value mask: 000000ffffffffff
[ 0.004194] ... max period: 000000007fffffff
[ 0.004196] ... fixed-purpose events: 3
[ 0.004197] ... event mask: 0000000700000003
[ 0.004201] Checking 'hlt' instruction... OK.
[ 0.022147] ACPI: Core revision 20090903
[ 0.036008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036012] ftrace: allocating 21786 entries in 43 pages
[ 0.040046] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082894] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.168065] CPU1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
[ 0.168078] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172016] Brought up 2 CPUs
[ 0.172018] Total of 2 processors activated (11200.08 BogoMIPS).
[ 0.172552] CPU0 attaching sched-domain:
[ 0.172555] domain 0: span 0-1 level MC
[ 0.172557] groups: 0 1
[ 0.172561] CPU1 attaching sched-domain:
[ 0.172563] domain 0: span 0-1 level MC
[ 0.172564] groups: 1 0
[ 0.172614] devtmpfs: initialized
[ 0.172614] regulator: core version 0.5
[ 0.172614] Time: 18:50:04 Date: 01/24/11
[ 0.172614] NET: Registered protocol family 16
[ 0.172614] Trying to unpack rootfs image as initramfs...
[ 0.172614] EISA bus registered
[ 0.172614] ACPI: bus type pci registered
[ 0.172614] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.172614] PCI: MCFG area at f0000000 reserved in E820
[ 0.172614] PCI: Using MMCONFIG for extended config space
[ 0.172614] PCI: Using configuration type 1 for base access
[ 0.180062] bio: create slab <bio-0> at 0
[ 0.181224] ACPI: EC: Look up EC in DSDT
[ 0.191301] ACPI: Interpreter enabled
[ 0.191305] ACPI: (supports S0 S1 S4 S5)
[ 0.191324] ACPI: Using IOAPIC for interrupt routing
[ 0.205829] ACPI: No dock devices found.
[ 0.206131] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.206452] pci 0000:00:03.2: reg 10 io port: [0xff00-0xff3f]
[ 0.206465] pci 0000:00:03.2: reg 20 io port: [0x1c00-0x1c3f]
[ 0.206469] pci 0000:00:03.2: reg 24 io port: [0x1c80-0x1cbf]
[ 0.206491] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.206496] pci 0000:00:03.2: PME# disabled
[ 0.206653] pci 0000:00:03.5: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
[ 0.206740] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.206769] pci 0000:00:04.0: supports D1 D2
[ 0.206770] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206773] pci 0000:00:04.0: PME# disabled
[ 0.206800] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.206834] pci 0000:00:04.1: supports D1 D2
[ 0.206835] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206839] pci 0000:00:04.1: PME# disabled
[ 0.206870] pci 0000:00:06.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.206898] pci 0000:00:06.0: supports D1 D2
[ 0.206900] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206902] pci 0000:00:06.0: PME# disabled
[ 0.206929] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.206962] pci 0000:00:06.1: supports D1 D2
[ 0.206963] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206966] pci 0000:00:06.1: PME# disabled
[ 0.206997] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.207025] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.207028] pci 0000:00:08.0: PME# disabled
[ 0.207081] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.207085] pci 0000:00:0a.0: reg 14 io port: [0xfc00-0xfc07]
[ 0.207089] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
[ 0.207093] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
[ 0.207116] pci 0000:00:0a.0: supports D1 D2
[ 0.207117] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207121] pci 0000:00:0a.0: PME# disabled
[ 0.207147] pci 0000:00:0b.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.207151] pci 0000:00:0b.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.207155] pci 0000:00:0b.0: reg 18 io port: [0x970-0x977]
[ 0.207159] pci 0000:00:0b.0: reg 1c io port: [0xb70-0xb73]
[ 0.207162] pci 0000:00:0b.0: reg 20 io port: [0xf700-0xf70f]
[ 0.207166] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
[ 0.207404] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207411] pci 0000:00:0c.0: PME# disabled
[ 0.207485] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207487] pci 0000:00:10.0: PME# disabled
[ 0.207715] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207722] pci 0000:00:15.0: PME# disabled
[ 0.207973] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207981] pci 0000:00:16.0: PME# disabled
[ 0.208241] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208248] pci 0000:00:17.0: PME# disabled
[ 0.208500] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208507] pci 0000:00:18.0: PME# disabled
[ 0.208588] pci 0000:00:09.0: transparent bridge
[ 0.208591] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.208594] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.208597] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.208658] pci 0000:00:0c.0: bridge io port: [0xd000-0xdfff]
[ 0.208666] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.208680] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.208711] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.208720] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.208730] pci 0000:03:00.0: reg 1c 64bit mmio pref: [0xee000000-0xefffffff]
[ 0.208735] pci 0000:03:00.0: reg 24 io port: [0xcf00-0xcf7f]
[ 0.208740] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.208789] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff]
[ 0.208792] pci 0000:00:10.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
[ 0.208795] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 0.208854] pci 0000:00:15.0: bridge io port: [0xb000-0xbfff]
[ 0.208861] pci 0000:00:15.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.208875] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.208935] pci 0000:00:16.0: bridge io port: [0xa000-0xafff]
[ 0.208943] pci 0000:00:16.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.208956] pci 0000:00:16.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
[ 0.209019] pci 0000:00:17.0: bridge io port: [0x9000-0x9fff]
[ 0.209026] pci 0000:00:17.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
[ 0.209040] pci 0000:00:17.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
[ 0.209100] pci 0000:00:18.0: bridge io port: [0x8000-0x8fff]
[ 0.209108] pci 0000:00:18.0: bridge 32bit mmio: [0xfd400000-0xfd4fffff]
[ 0.209121] pci 0000:00:18.0: bridge 64bit mmio pref: [0xfd300000-0xfd3fffff]
[ 0.209187] pci_bus 0000:00: on NUMA node 0
[ 0.209191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.209452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.315409] Freeing initrd memory: 7780k freed
[ 0.330210] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330375] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330537] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330698] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.330860] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331022] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331183] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331345] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331507] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331669] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331830] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.331992] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332165] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332327] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332490] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332653] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332814] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.332977] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333139] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333301] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333463] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333628] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333791] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.333954] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334117] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334279] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334442] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334604] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334767] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.334929] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335092] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335254] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335417] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335580] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335742] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.335904] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.336077] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.336241] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.336404] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.336566] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
[ 0.336728] ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15)
[ 0.336889] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15)
[ 0.337051] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.337214] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
[ 0.337376] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.337539] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.337701] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.337864] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.338058] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.338248] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.338438] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.338628] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.338818] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
[ 0.339007] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
[ 0.339195] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
[ 0.339386] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
[ 0.339573] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
[ 0.339761] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
[ 0.339949] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
[ 0.340149] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
[ 0.340339] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
[ 0.340529] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
[ 0.340720] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
[ 0.340911] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
[ 0.341101] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
[ 0.341290] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
[ 0.341478] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
[ 0.341666] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
[ 0.341855] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
[ 0.342043] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
[ 0.342233] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
[ 0.342423] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
[ 0.342611] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
[ 0.342798] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
[ 0.342988] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
[ 0.343177] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
[ 0.343366] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
[ 0.343554] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
[ 0.343743] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
[ 0.343933] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
[ 0.344134] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
[ 0.344322] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
[ 0.344512] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
[ 0.344701] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
[ 0.344891] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.345080] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.345270] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.345459] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.345649] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.345838] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.346028] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.346218] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.346408] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.346597] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.346788] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.346978] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.347101] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.347103] vgaarb: loaded
[ 0.347200] SCSI subsystem initialized
[ 0.347218] libata version 3.00 loaded.
[ 0.347218] usbcore: registered new interface driver usbfs
[ 0.347218] usbcore: registered new interface driver hub
[ 0.347218] usbcore: registered new device driver usb
[ 0.347218] ACPI: WMI: Mapper loaded
[ 0.347218] PCI: Using ACPI for IRQ routing
[ 0.347218] NetLabel: Initializing
[ 0.347218] NetLabel: domain hash size = 128
[ 0.347218] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.347218] NetLabel: unlabeled traffic allowed by default
[ 0.347218] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31, 31
[ 0.347218] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.352015] Switching to clocksource tsc
[ 0.353546] AppArmor: AppArmor Filesystem Enabled
[ 0.353552] pnp: PnP ACPI init
[ 0.353559] ACPI: bus type pnp registered
[ 0.359415] pnp: PnP ACPI: found 11 devices
[ 0.359417] ACPI: ACPI bus type pnp unregistered
[ 0.359420] PnPBIOS: Disabled by ACPI PNP
[ 0.359427] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.359429] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.359431] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.359433] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.359435] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.359437] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.359440] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.359442] system 00:01: iomem range 0x70000000-0x7fffffff has been reserved
[ 0.359449] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.359451] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.359456] system 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 0.359461] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved
[ 0.359463] system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.359465] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.359467] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.359471] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.359473] system 00:0a: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.359475] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.359478] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.359480] system 00:0a: iomem range 0xfeff0000-0xfeff03ff could not be reserved
[ 0.394216] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.394218] pci 0000:00:09.0: IO window: 0xe000-0xefff
[ 0.394222] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.394225] pci 0000:00:09.0: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.394230] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.394234] pci 0000:00:0c.0: IO window: 0xd000-0xdfff
[ 0.394244] pci 0000:00:0c.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.394251] pci 0000:00:0c.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.394265] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.394267] pci 0000:00:10.0: IO window: 0xc000-0xcfff
[ 0.394270] pci 0000:00:10.0: MEM window: 0xfb000000-0xfcffffff
[ 0.394273] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000efffffff
[ 0.394276] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.394281] pci 0000:00:15.0: IO window: 0xb000-0xbfff
[ 0.394290] pci 0000:00:15.0: MEM window: 0xfda00000-0xfdafffff
[ 0.394298] pci 0000:00:15.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.394310] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 0.394315] pci 0000:00:16.0: IO window: 0xa000-0xafff
[ 0.394324] pci 0000:00:16.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.394331] pci 0000:00:16.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
[ 0.394344] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
[ 0.394348] pci 0000:00:17.0: IO window: 0x9000-0x9fff
[ 0.394358] pci 0000:00:17.0: MEM window: 0xfd600000-0xfd6fffff
[ 0.394365] pci 0000:00:17.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff
[ 0.394378] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07
[ 0.394382] pci 0000:00:18.0: IO window: 0x8000-0x8fff
[ 0.394392] pci 0000:00:18.0: MEM window: 0xfd400000-0xfd4fffff
[ 0.394399] pci 0000:00:18.0: PREFETCH window: 0x000000fd300000-0x000000fd3fffff
[ 0.394416] pci 0000:00:09.0: setting latency timer to 64
[ 0.394712] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
[ 0.394714] alloc irq_desc for 16 on node -1
[ 0.394716] alloc kstat_irqs on node -1
[ 0.394720] pci 0000:00:0c.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 0.394728] pci 0000:00:0c.0: setting latency timer to 64
[ 0.394735] pci 0000:00:10.0: setting latency timer to 64
[ 0.395025] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
[ 0.395027] pci 0000:00:15.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
[ 0.395035] pci 0000:00:15.0: setting latency timer to 64
[ 0.395325] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
[ 0.395327] pci 0000:00:16.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.395335] pci 0000:00:16.0: setting latency timer to 64
[ 0.395625] ACPI: PCI Interrupt Link [AE5A] enabled at IRQ 16
[ 0.395628] pci 0000:00:17.0: PCI INT A -> Link[AE5A] -> GSI 16 (level, low) -> IRQ 16
[ 0.395635] pci 0000:00:17.0: setting latency timer to 64
[ 0.395925] ACPI: PCI Interrupt Link [AE6A] enabled at IRQ 16
[ 0.395928] pci 0000:00:18.0: PCI INT A -> Link[AE6A] -> GSI 16 (level, low) -> IRQ 16
[ 0.395935] pci 0000:00:18.0: setting latency timer to 64
[ 0.395949] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.395951] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.395953] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.395955] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.395956] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.395958] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.395960] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.395962] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.395964] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.395965] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.395967] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.395969] pci_bus 0000:03: resource 1 mem: [0xfb000000-0xfcffffff]
[ 0.395971] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xefffffff]
[ 0.395973] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.395974] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.395976] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.395978] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.395980] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.395981] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff]
[ 0.395983] pci_bus 0000:06: resource 0 io: [0x9000-0x9fff]
[ 0.395985] pci_bus 0000:06: resource 1 mem: [0xfd600000-0xfd6fffff]
[ 0.395987] pci_bus 0000:06: resource 2 pref mem [0xfd500000-0xfd5fffff]
[ 0.395989] pci_bus 0000:07: resource 0 io: [0x8000-0x8fff]
[ 0.395991] pci_bus 0000:07: resource 1 mem: [0xfd400000-0xfd4fffff]
[ 0.395992] pci_bus 0000:07: resource 2 pref mem [0xfd300000-0xfd3fffff]
[ 0.396015] NET: Registered protocol family 2
[ 0.396084] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.396319] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396728] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.396920] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.396922] TCP reno registered
[ 0.396976] NET: Registered protocol family 1
[ 0.428134] pci 0000:03:00.0: Boot video device
[ 0.428261] cpufreq-nforce2: No nForce2 chipset.
[ 0.428280] Scanning for low memory corruption every 60 seconds
[ 0.428345] audit: initializing netlink socket (disabled)
[ 0.428352] type=2000 audit(1295895004.427:1): initialized
[ 0.435538] highmem bounce pool size: 64 pages
[ 0.435542] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.436641] VFS: Disk quotas dquot_6.5.2
[ 0.436683] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.437090] fuse init (API version 7.13)
[ 0.437149] msgmni has been set to 1672
[ 0.437304] alg: No test for stdrng (krng)
[ 0.437342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.437344] io scheduler noop registered
[ 0.437346] io scheduler anticipatory registered
[ 0.437347] io scheduler deadline registered
[ 0.437374] io scheduler cfq registered (default)
[ 0.437649] alloc irq_desc for 24 on node -1
[ 0.437651] alloc kstat_irqs on node -1
[ 0.437669] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.437689] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.438043] alloc irq_desc for 25 on node -1
[ 0.438045] alloc kstat_irqs on node -1
[ 0.438061] pcieport 0000:00:15.0: irq 25 for MSI/MSI-X
[ 0.438080] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.438423] alloc irq_desc for 26 on node -1
[ 0.438424] alloc kstat_irqs on node -1
[ 0.438440] pcieport 0000:00:16.0: irq 26 for MSI/MSI-X
[ 0.438459] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.438801] alloc irq_desc for 27 on node -1
[ 0.438802] alloc kstat_irqs on node -1
[ 0.438818] pcieport 0000:00:17.0: irq 27 for MSI/MSI-X
[ 0.438837] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.439179] alloc irq_desc for 28 on node -1
[ 0.439180] alloc kstat_irqs on node -1
[ 0.439196] pcieport 0000:00:18.0: irq 28 for MSI/MSI-X
[ 0.439215] pcieport 0000:00:18.0: setting latency timer to 64
[ 0.439365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.439382] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.439464] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.439467] ACPI: Power Button [PWRB]
[ 0.439525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.439527] ACPI: Power Button [PWRF]
[ 0.440349] ACPI: SSDT cfeeb100 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.440640] processor LNXCPU:00: registered as cooling_device0
[ 0.440918] ACPI: SSDT cfeeb5c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.441194] processor LNXCPU:01: registered as cooling_device1
[ 0.447389] isapnp: Scanning for PnP cards...
[ 0.448402] efifb: probing for efifb
[ 0.448420] efifb: framebuffer at 0xef12c000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.448423] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.448424] efifb: scrolling: redraw
[ 0.448426] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.448449] fb0: EFI VGA frame buffer device
[ 0.448453] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.448516] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.448788] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.449537] brd: module loaded
[ 0.449877] loop: module loaded
[ 0.449932] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.450301] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.450305] alloc irq_desc for 23 on node -1
[ 0.450306] alloc kstat_irqs on node -1
[ 0.450310] pata_acpi 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.450332] pata_acpi 0000:00:0b.0: setting latency timer to 64
[ 0.450340] pata_acpi 0000:00:0b.0: PCI INT A disabled
[ 0.450550] Fixed MDIO Bus: probed
[ 0.450576] PPP generic driver version 2.4.2
[ 0.450597] tun: Universal TUN/TAP device driver, 1.6
[ 0.450599] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.450654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.450943] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 0.450945] alloc irq_desc for 22 on node -1
[ 0.450946] alloc kstat_irqs on node -1
[ 0.450949] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.450956] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.450958] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.450984] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.451001] ehci_hcd 0000:00:04.1: debug port 1
[ 0.451008] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.451020] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfe02e000
[ 0.459852] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.459917] usb usb1: configuration #1 chosen from 1 choice
[ 0.459937] hub 1-0:1.0: USB hub found
[ 0.459942] hub 1-0:1.0: 6 ports detected
[ 0.460148] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 0.460261] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
[ 0.460263] alloc irq_desc for 21 on node -1
[ 0.460265] alloc kstat_irqs on node -1
[ 0.460268] ehci_hcd 0000:00:06.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
[ 0.460274] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.460276] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.460303] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.460318] ehci_hcd 0000:00:06.1: debug port 1
[ 0.460324] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 0.460336] ehci_hcd 0000:00:06.1: irq 21, io mem 0xfe02c000
[ 0.471851] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.471912] usb usb2: configuration #1 chosen from 1 choice
[ 0.471930] hub 2-0:1.0: USB hub found
[ 0.471935] hub 2-0:1.0: 6 ports detected
[ 0.471972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.472258] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[ 0.472260] alloc irq_desc for 20 on node -1
[ 0.472262] alloc kstat_irqs on node -1
[ 0.472265] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[ 0.472271] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.472273] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.472296] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.472311] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfe02f000
[ 0.529880] usb usb3: configuration #1 chosen from 1 choice
[ 0.529898] hub 3-0:1.0: USB hub found
[ 0.529904] hub 3-0:1.0: 6 ports detected
[ 0.530216] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
[ 0.530219] ohci_hcd 0000:00:06.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
[ 0.530225] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.530227] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.530250] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.530266] ohci_hcd 0000:00:06.0: irq 23, io mem 0xfe02d000
[ 0.585875] usb usb4: configuration #1 chosen from 1 choice
[ 0.585893] hub 4-0:1.0: USB hub found
[ 0.585899] hub 4-0:1.0: 6 ports detected
[ 0.585936] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.585985] PNP: No PS/2 controller found. Probing ports directly.
[ 0.587447] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.587451] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.587530] mice: PS/2 mouse device common for all mice
[ 0.587612] rtc_cmos 00:05: RTC can wake from S4
[ 0.587637] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.587684] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.587751] device-mapper: uevent: version 1.0.3
[ 0.587815] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 0.587865] device-mapper: multipath: version 1.1.0 loaded
[ 0.587867] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.587943] EISA: Probing bus 0 at eisa.0
[ 0.587947] Cannot allocate resource for EISA slot 1
[ 0.587962] Cannot allocate resource for EISA slot 8
[ 0.587963] EISA: Detected 0 cards.
[ 0.588012] cpuidle: using governor ladder
[ 0.588014] cpuidle: using governor menu
[ 0.588321] TCP cubic registered
[ 0.588431] NET: Registered protocol family 10
[ 0.588765] lo: Disabled Privacy Extensions
[ 0.589005] NET: Registered protocol family 17
[ 0.589406] Using IPI No-Shortcut mode
[ 0.589454] PM: Resume from disk failed.
[ 0.589462] registered taskstats version 1
[ 0.589978] Magic number: 11:469:848
[ 0.590066] rtc_cmos 00:05: setting system clock to 2011-01-24 18:50:05 UTC (1295895005)
[ 0.590068] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.590069] EDD information not available.
[ 0.779925] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.800202] isapnp: No Plug & Play device found
[ 0.800215] Freeing unused kernel memory: 656k freed
[ 0.800489] Write protecting the kernel text: 4684k
[ 0.800517] Write protecting the kernel read-only data: 1840k
[ 0.811643] udev: starting version 151
[ 0.855662] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.856055] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 0.856059] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 0.856063] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.921128] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:01:2e:2c:31:7e
[ 0.921131] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 0.921148] ahci 0000:00:0b.0: version 3.0
[ 0.921161] ahci 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.921197] alloc irq_desc for 29 on node -1
[ 0.921199] alloc kstat_irqs on node -1
[ 0.921206] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
[ 0.921265] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 0.921267] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio
[ 0.921270] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.921589] scsi0 : ahci
[ 0.921677] scsi1 : ahci
[ 0.921718] scsi2 : ahci
[ 0.921761] scsi3 : ahci
[ 0.921809] scsi4 : ahci
[ 0.921854] scsi5 : ahci
[ 0.921997] ata1: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026100 irq 29
[ 0.921999] ata2: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026180 irq 29
[ 0.922001] ata3: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026200 irq 29
[ 0.922003] ata4: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026280 irq 29
[ 0.922005] ata5: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026300 irq 29
[ 0.922006] ata6: SATA max UDMA/133 abar m8192 at 0xfe026000 port 0xfe026380 irq 29
[ 1.051206] usb 1-1: configuration #1 chosen from 1 choice
[ 1.240010] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.240012] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.240024] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.240028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.240036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.240038] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.240643] ata2.00: ATAPI: TSSTcorp CDDVDW SN-S083F, SB01, max UDMA/100
[ 1.241598] ata2.00: configured for UDMA/100
[ 1.253491] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[ 1.253494] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.254530] ata1.00: configured for UDMA/133
[ 1.254615] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 1.254723] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.254789] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.254820] sd 0:0:0:0: [sda] Write Protect is off
[ 1.254822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.254838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.254933] sda:
[ 1.256841] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S083F SB01 PQ: 0 ANSI: 5
[ 1.260369] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.260371] Uniform CD-ROM driver Revision: 3.20
[ 1.260435] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.260472] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.263223] sda1 sda2 <
[ 1.272507] usb 2-3: new high speed USB device using ehci_hcd and address 3
[ 1.295924] sda5 >
[ 1.296102] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.419255] usb 2-3: configuration #1 chosen from 1 choice
[ 1.514512] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 1.528805] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 1.835628] usb 2-6: configuration #1 chosen from 1 choice
[ 2.136008] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.357857] usb 4-1: configuration #1 chosen from 1 choice
[ 2.360814] hub 4-1:1.0: USB hub found
[ 2.363796] hub 4-1:1.0: 3 ports detected
[ 2.665795] usb 4-1.2: new full speed USB device using ohci_hcd and address 3
[ 2.789858] usb 4-1.2: configuration #1 chosen from 1 choice
[ 2.869783] usb 4-1.3: new full speed USB device using ohci_hcd and address 4
[ 2.993845] usb 4-1.3: configuration #1 chosen from 1 choice
[ 8.382509] udev: starting version 151
[ 8.422751] Linux agpgart interface v0.103
[ 8.471521] Adding 9058296k swap on /dev/sda5. Priority:-1 extents:1 across:9058296k
[ 8.478505] lp: driver loaded but no devices found
[ 8.595195] nvidia: module license 'NVIDIA' taints kernel.
[ 8.595197] Disabling lock debugging due to kernel taint
[ 8.603328] type=1505 audit(1295895013.509:2): operation="profile_load" pid=612 name="/sbin/dhclient3"
[ 8.603838] type=1505 audit(1295895013.509:3): operation="profile_load" pid=612 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.604120] type=1505 audit(1295895013.513:4): operation="profile_load" pid=612 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.605201] type=1505 audit(1295895013.513:5): operation="profile_replace" pid=756 name="/sbin/dhclient3"
[ 8.605713] type=1505 audit(1295895013.513:6): operation="profile_replace" pid=756 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.605997] type=1505 audit(1295895013.513:7): operation="profile_replace" pid=756 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.179960] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 9.179964] ACPI: resource nForce2_smbus [0x1c80-0x1cbf] conflicts with ACPI region SM01 [0x1c80-0x1cbf]
[ 9.179965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.179967] nForce2_smbus 0000:00:03.2: Error probing SMB2.
[ 9.181851] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.184458] Console: switching to colour frame buffer device 80x30
[ 9.186946] vga16fb: initializing
[ 9.186948] vga16fb: mapped to 0xc00a0000
[ 9.186950] vga16fb: not registering due to another framebuffer present
[ 9.215677] Linux video capture interface: v2.00
[ 9.221328] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 9.221546] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input3
[ 9.221585] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 9.223304] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0805)
[ 9.223950] cfg80211: Calling CRDA to update world regulatory domain
[ 9.242905] input: UVC Camera (046d:0805) as /devices/pci0000:00/0000:00:06.1/usb2/2-6/2-6:1.0/input/input4
[ 9.242947] usbcore: registered new interface driver uvcvideo
[ 9.242949] USB Video Class driver (v0.1.0)
[ 9.279709] cfg80211: World regulatory domain updated:
[ 9.279711] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.279714] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.279715] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.279717] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.279719] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.279721] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.281101] vt6656_stage: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.283181] VIA Networking Wireless LAN USB Driver 1.19_12
[ 9.283195] VIA Networking Wireless LAN USB Driver Ver. 1.19_12
[ 9.283197] Copyright (c) 2004 VIA Networking Technologies, Inc.
[ 9.294271] usbcore: registered new interface driver hiddev
[ 9.308751] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input5
[ 9.308812] generic-usb 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:06.0-1.2/input0
[ 9.315043] usbcore: registered new interface driver usbhid
[ 9.315045] usbhid: v2.6:USB HID core driver
[ 9.331187] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input6
[ 9.331299] logitech 0003:046D:C71F.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:06.0-1.3/input0
[ 9.394506] usb 2-3: reset high speed USB device using ehci_hcd and address 3
[ 9.398790] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 9.398794] HDA Intel 0000:00:08.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.398796] hda_intel: Disable MSI for Nvidia chipset
[ 9.398815] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 9.442142] eth0: no link during initialization.
[ 9.442555] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.524137] phy0: Selected rate control algorithm 'minstrel'
[ 9.524714] Registered led device: rt73usb-phy0::radio
[ 9.524726] Registered led device: rt73usb-phy0::assoc
[ 9.524740] Registered led device: rt73usb-phy0::quality
[ 9.525267] usbcore: registered new interface driver rt73usb
[ 9.533538] usbcore: registered new interface driver vt6656
[ 9.555770] Config_FileOperation file Not exist
[ 9.605445] usbcore: registered new interface driver snd-usb-audio
[ 9.730806] type=1505 audit(1295895014.637:8): operation="profile_replace" pid=1010 name="/sbin/dhclient3"
[ 9.731316] type=1505 audit(1295895014.637:9): operation="profile_replace" pid=1010 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.731604] type=1505 audit(1295895014.637:10): operation="profile_replace" pid=1010 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.733345] type=1505 audit(1295895014.641:11): operation="profile_load" pid=1009 name="/usr/share/gdm/guest-session/Xsession"
[ 9.821648] Zone=[2][E][U]!!
[ 9.884922] rt73usb 1-1:1.0: firmware: requesting rt73.bin
[ 10.013626] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Plus d'informations sur la liste de diffusion Ldl62